Bending materials

Lasered Components is bending materials with a fold between 0.5mm to 12mm. We are able to expand our tooling range upon request to fold up to 20mm.

To see the specific materials, grades, and thicknesses we stock and have available to order, please select the material from the main menu.

Enquire nowEnquire now

Bending materials

Lasered Components is bending materials with a fold between 0.5mm to 12mm. We are able to expand our tooling range upon request to fold up to 20mm.

Enquire NowEnquire Now

Precision Bending for a Range of Materials

The fold suitability is entirely dependent on the design, the radius of the bend and length of the part. We can bend an array of materials including: CR4, Zintec , Galvanised Steel, S275, Aluminium , Stainless Steel , Copper & Brass.

We do not currently offer bending services for the following materials: Treadplate/Durbar.

Precision Bending for a Range of Materials – No Minimum Order Quantity

The fold suitability is entirely dependent on the design, the radius of the bend and length of the part. We can bend an array of materials including: CR4, Zintec , Galvanised Steel, S275, Aluminium , Stainless Steel , Copper & Brass.

Please note: there is no minimum order quantity, but there is a minimum order charge of £75 plus VAT.

We do not currently offer bending services for the following materials: Treadplate/Durbar.

Mild steel  –  Stainless steel  –  Aluminium  –  Brass  –  Zintec  –  Galvanised Steel  –  Copper  – Cor-Ten –Mild steel  –  Stainless steel  –  Aluminium  –  Brass  –  Zintec  –  Galvanised Steel  –  Copper  – Cor-Ten –

Mild steel  –  Stainless steel  –  Aluminium  –  Brass  –  Zintec  –  Galvanised Steel  –  Copper  –Mild steel  –  Stainless steel  –  Aluminium  –  Brass  –  Zintec  –  Galvanised Steel  –  Copper  –

Minimum & Maximum thicknesses

To see the specific materials, grades, and thicknesses we stock and have available to order, please select the material from the toggles below. You can also download the full mateiral table as a PDF by clicking ‘View & download PDF’.

Bending from 0.7mm to 12mm – View mild steel material page


Our most versatile and cost-effective laser cut material, available in grades S275, S355 and CR4. Suitable for structural, industrial and fabrication applications across a wide range of thicknesses from thin sheet to heavy plate up to 40mm

Bending from 3mm to 12mm – View mild steel material page

Our most versatile and cost-effective laser cut material, available in grades S275, S355 and CR4. Suitable for structural, industrial and fabrication applications across a wide range of thicknesses from thin sheet to heavy plate up to 40mm

See full material information

Bending from 0.7mm to 3mm – View zintec material page

Thin zinc-coated cold-rolled steel

Zintec offers a consistent, paint-ready surface with mild corrosion resistance, making it the preferred choice for automotive panels, enclosures, electronics housings and any application requiring a clean painted finish

See full material information

Bending from 0.5 mm to 5 mm – View galvanised steel material page

Galvanised steel combines the strength of mild steel with a protective zinc coating, making it the go-to choice for outdoor, construction and general fabrication applications where rust resistance is required without the cost of stainless

See full material information

Bending from 0.5mm to 6mm – View aluminium material page

A lightweight yet strong material laser cut across a range of grades with excellent precision. Ideal for aerospace, electronics, signage and architectural applications where weight reduction without sacrificing strength is essential.

See full material information

Bending from 0.5mm to 8mm – View stainless steel material page

We laser cut stainless steel across all major grades and finishes including 304, 316 and 430, in a wide range of surface specifications:

  • 2B cold rolled and hot rolled
  • Grained / brushed one and two sides
  • Mirror polished one and two sides
  • Bright annealed and dull polished
  • Nirosta 4003 cold and hot rolled
  • 240S and 240S variants

Ideal for food processing, medical, marine, architectural and decorative applications where both precision and surface finish matter.

See full material information

Bending from 0.9mm to 5mm – View copper material page

Copper is prized for its exceptional electrical and thermal conductivity, making it the material of choice for busbars, electrical components, heat exchangers and specialist engineering applications. We laser cut copper sheet with precision across all standard thicknesses.

See full material information | copper

Bending from 0.9mm to 5mm – View brass material page

Brass offers excellent machinability and a distinctive golden finish, making it ideal for decorative panels, signage, electronics components and precision engineering parts. We laser cut brass sheet to tight tolerances with clean, burr-free edges.

See full material information | brass

Bending from 0.9mm to 12mm – View cor-ten material page

Weathering steel with self-protecting patina

Cor-Ten develops a stable rust-like outer layer that acts as its own protective barrier, eliminating the need for paint or coatings. Widely specified by architects, sculptors and landscapers for outdoor features, cladding and signage.

See full material information |

Maximum:

– Sheet size we can cut is 2980 mm x 1480 mm.
– Part size we can cut is 2980 mm x 1480 mm – with some exceptions.
– Sheet size for bending Copper & Brass is 1980 mm x 980 mm.

View our full material availability table

Minimum & Maximum thicknesses

0.7mm to 3mm

0.7mm to 3mm

0.5 mm to 5 mm

3mm to 12mm

0.5mm to 6mm

0.5mm to 8mm

0.9mm to 5mm

Maximum sizes

– Sheet size we can cut is 2980 mm x 1480 mm.

– Part size we can cut is 2980 mm x 1480 mm – with some exceptions.

– Sheet size for bending Copper & Brass is 1980 mm x 980 mm.

Precsion laser cutting & bending

Traceability

We offer full traceability for all our metal components from source to delivery. Each item supplied by us will go through our MRP (Material Requirements Planning) system to enable us to give as much information as possible to our customers about their order.

Find out about traceabilityFind out about traceability

Traceability

We offer full traceability for all our metal components from source to delivery. Each item supplied by us will go through our MRP (Material Requirements Planning) system to enable us to give as much information as possible to our customers about their order.

Find out about traceabilityFind out about traceability

learn more about bending

Want to learn more about sheet metal bending? We have lots of information to help you learn about the bending process from concept to production.

Learn moreLearn more

learn more about bending

Want to learn more about sheet metal bending? We have lots of information to help you learn about the bending process from concept to production.

Get fast quotes

We accept DXF, DWG and NC files. Please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Accurate price, reliable lead time, no hidden extras.

Fast Quotes

Open between 7.30am and 4.00pm we aim to answer every quote within one hour. Outside these hours we will respond the next working morning. We accept DXF, DWG and NC files, please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Ready to quote?

Files that we accept are DXF, DWG and NC files, please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182